You can now capture and manage multiple photos for each defect type directly in the mobile app.
Previous Behavior
Only one photo could be taken per defect type.
After capturing a photo, the camera would close automatically.
A small photo preview appeared next to the defect type.
If the defect count field was empty, the system automatically counted the objects in the photo and filled the count.
New Behavior
On the Defects screen during an inspection, tap the camera icon next to any defect type.
The camera screen now stays open after taking a photo.
Tap Done (top-right) when you finish capturing all desired photos.
Each photo is displayed in a counter at the bottom-left of the camera screen.
Tapping the photo counter opens a photo gallery for that defect type.
In the gallery, you can slide between photos and choose to delete or keep each one.
Automatic Counting:
If the defect count field is empty, the system will now sum all detected objects across multiple photos and automatically fill the count field for that defect type.
QC Report Updates
In the QC Report for this inspection, each defect type will display all the related photos you captured during the inspection.
This enhancement allows better documentation of defects with multiple supporting photos, improves automatic counting accuracy, and ensures all photos are visible in the QC Report.